top of page

Benco B17e

B17e.png

B17e Eco-Strip - the most powerful non-methylene chloride stripper for automotive rims. Strong enough to carry the B17 badge of Benco products - the "e" stands for Eco-friendly and Economical. Made in the USA, B17e works best when heated between 180-200 degrees, removing finishes up to 3 times faster than our competitors. Use B17e to strip tough OEM finishes on anything you would normally use B17 for but may not due to government restrictions on methylene chloride. B17e is the fastest automotive wheel stripper available if you want a non-methylene chloride stripper.

​

Submersion in B17e will remove epoxies, polyurethanes, polyester coatings, electrocoat coatings, and non-catalyzed paints and coatings. B17e contains ingredients that have very low evaporation rates that provide formulation stability, allowing the product to be used extensively without performance deterioration. B17e is formulated with the highest quality virgin solvents, surfactants, and additives.

​

Click on the button below to get more information about the product, prices and delivery times.

Description

  • Available container sizes : 55 gallons (1 drum).

  • Liquid wheel stripper (Powder Coat Stripper). B17e is an industrial coatings remover.

  • Non-corrosive to steel, aluminum or magnesium parts.

  • Very fine liquid penetrates quickly through finishes and crevices.

  • Heat between 180-200 for optimal results.

  • Average immersion time: 15 minutes for silver/clear, 120 minutes for resistant black euro coatings.

  • Keep submerged until all coatings are removed.

  • Rinse with water for complete removal.

  • Simply replenish as needed. The lifespan of B17e will vary depending on its use.

Specifications

  • Specific Gravity : 1.03

  • Percent Volatile : >100%

  • VOC Content : LVP exempt

  • Vapor Pressure : <2mm Hg

  • Vapor Density : >1.0

  • Boiling Point : 189C

  • Freezing Point : Moins de -40 F

  • Flash Point : 93C

  • pH : 10-12

Related items

bottom of page